Advanced Search Results
Refine your search by using the category filter.
Anhydrous Sodium Sulfate (Na2SO4)
Anhydrous Sodium Sulfate is a fine, white, odorless granular crystalline solid used in laboratory, technical, and industrial applications. This water soluble inorganic salt is also known as anhydrous disodium sulfate or salt cake. The anhydrous form contains no water of crystallization.
Product Specifications
| Chemical Name | Sodium Sulfate, Anhydrous |
| Chemical Formula | Na2SO4 |
| CAS Number | 7757-82-6 |
| Molecular Weight | 142.04 g/mol |
| Physical Form | Fine crystalline granules |
| Color | White |
| Odor | Odorless |
| Water Solubility | Soluble |
| Hydration State | Anhydrous, contains no water of crystallization |
| Intended Use | General Laboratory and Technical Applications |
Applications and Benefits:
- Laboratory Applications: Used in general laboratory procedures and technical experiments where anhydrous sodium sulfate is appropriate. Suitability depends on the requirements of the specific procedure.
- Powdered Detergents: Serves as a filler and diluent in powdered laundry detergent formulations. Adds bulk and helps adjust the concentration of active ingredients in the finished powder.
- Glass Manufacturing: Acts as a fining agent in selected glass formulations to help remove gas bubbles from molten glass. Suitability depends on the glass formulation, processing conditions, and material grade.
- Textile Processing: Used as an electrolyte in selected textile dye baths to help control dye uptake and promote more uniform coloration. Required concentrations depend on the dye, fiber, and dyeing process.
- Pulp and Paper Manufacturing: Used in kraft pulp production as a source of sulfur in the chemical recovery cycle. During recovery, sodium sulfate is converted to sodium sulfide, a component of pulping liquor.
Handling and Storage
Keep the container tightly closed. Store in a dry location and protect from moisture. Read the Safety Data Sheet (SDS) before handling. The material may irritate the eyes and may cause mild irritation to the skin and respiratory tract. Avoid generating or inhaling dust during handling.
Caution:
For laboratory and technical use. Avoid contact with eyes and excessive inhalation of airborne dust. Use appropriate protective equipment during handling. Consult the Safety Data Sheet before use.
Product suitability for any specific application must be determined by the purchaser through appropriate testing and evaluation. No specific purity, performance, or regulatory compliance is guaranteed unless expressly documented. No certification for food, pharmaceutical, or other regulated applications is provided.
Hydroxyethyl Cellulose HEC 250 HHBR
HEC (Hydroxyethylcellulose) is a nonionic thickener and rheology modifier for water-based products. It is commonly used in detergents, cleaners, shampoos, conditioners, body washes, lotions, paints, coatings, adhesives, and other aqueous formulations requiring viscosity control and stable flow properties. This grade of HEC with designation 250 HHBR offers delayed hydration along with enhanced resistance to biological and chemical degradation. The rheology characteristics of the HHBR grade help provide stable viscosity performance in surfactant-based and industrial aqueous systems. A 1% preparation of HEC250HHBR in water typically produces a viscosity of approximately 3400 to 5500 cps. HEC250HHBR is an off-white granular powder that disperses and dissolves in cold or hot water to form smooth clear solutions with pseudoplastic flow behavior. Chemically, it is cellulose ether modified with hydroxyethyl groups to provide thickening, stabilization, water retention, suspension, and rheology control properties. For cold or room temperature preparation, continuous agitation for approximately 30 minutes is recommended to achieve full hydration and uniform viscosity development. HEC complies with applicable U.S. Food and Drug Administration requirements for certain food-contact surface applications as specified in the Code of Federal Regulations, Title 21. This grade of HEC does not comply with USP/FCC requirements for pharmaceutical applications. Perfect for detergent formulators, coating manufacturers, adhesive producers, industrial manufacturers, and personal care developers.
Product Specifications
| Product Name | Hydroxyethyl Cellulose HEC 250 HHBR |
| CAS Number | 9004-62-0 |
| CAS Name | Cellulose, 2-hydroxyethyl ether |
| Appearance | Off-white granular powder |
| Moisture Content | 5% Max |
| pH of Solution | 6.0 to 8.5 |
| Particle Size | Passes U.S. Mesh 325 |
| Viscosity | 3400 to 5500 cps, 1% solution |
| Hydration | Delayed hydration grade |
| Preparation | Continuous agitation for approximately 30 minutes is recommended for cold or room temperature preparation. |
Applications and Benefits:
- Nonionic thickener and rheology modifier for water-based products.
- Provides viscosity control and stable flow properties in aqueous formulations.
- Delayed hydration grade for controlled dispersion and hydration.
- Enhanced resistance to biological and chemical degradation.
- Stable viscosity performance in surfactant-based and industrial aqueous systems.
- Disperses and dissolves in cold or hot water to form smooth clear solutions.
- Provides pseudoplastic flow behavior.
- Supports thickening, stabilization, water retention, suspension, and rheology control.
- Compatible with many surfactants, polymers, salts, and formulation additives.
- Suitable for formulations exposed to microbial growth conditions or long-term storage instability.
- Used in detergents and household cleaners.
- Used in shampoos, conditioners, body washes, lotions, and personal care products.
- Used in water-based paints and coatings.
- Used in adhesives and latex systems.
- Used in industrial aqueous formulations and pigment dispersions.
- Suitable for detergent formulators, coating manufacturers, adhesive producers, industrial manufacturers, and personal care developers.
Caution:
This grade of HEC does not comply with USP/FCC requirements for pharmaceutical applications. Review applicable regulatory requirements before use. ADD SDS LINK HERE
Hydroxyethyl Cellulose HEC 250 HHBR
HEC (Hydroxyethylcellulose) is a thickener for water based products. The HEC allows you to modify rheology and build pleasing textures in shampoos, conditioners, body washes, hair colorants, creams and lotions, skin cleansers and many more.
This grade of HEC with designation 250 HHBR offer delayed hydration and superior resistance to biological and chemical degradation. A 1% preparation of HEC250 in water results a viscosity of about 3400 up to 5500 cps.
It is an off-white powder that is dispersed and dissolved in cold or hot water, to produce solutions of varying viscosities. Chemically, it is cellulose of short to very long chain that has been etherified to hydroxyethyl ether to achieve an optimum balance of properties. HEC250 is used as a viscosity and rheology modifier, protective colloid, water retention agent, stabilizer and suspending agent, particularly in those applications where a nonionic material is desired.
For cold or room temperature preparation a continuous stirring of at least 30 minutes is recommended to get a consistent and homogeneous viscosity.
Other properties are as follows:
Moisture content as packed, 5% Max
pH of solution: 6 up to 8.5
Particle size: Passes U.S. Mesh 325
Uses/ Applications:
HEC250HHBR hydroxyethylcellulose is a granular powder that dissolves in water to give clear smooth solutions, which exhibit a pseudoplastic flow behavior. At neutral pH and ambient temperature, it disperses in water without lump formation and provides easy dissolution. These solutions are unaffected by high concentration of soluble salts. Viscosity is little affected by mild acids and alkalies. Because of its nonionic character HEC has wide compatibility with other materials, such as emulsion polymers, natural and synthetic gums, emulsifiers, defoamers.
HEC is used as high efficiency nonionic thickener, water retension aid and rheology modifier in all types of water based paints and surface coatings, and in a variety of other aqueous industrial products. HEC250HHBR offers additional feature of superior storage stability when used under conditions that enhance microbial growth.
As a protective colloid and stabilizer HEC performs outstandingly in the emulsion and suspension polymerization of many vinyl polymers. Its unique combination of properties explains its use in pigment dispersion and in tile adhesives.
Regulatory Status:
HEC is in compliance with the requirements of the U.S. Food and Drug Administration for use in adhesives, resinous and polymeric coatings employed on food-contact surfaces of metal, paper or paperboard articles, and other suitable substances intended for use in food packaging as specified in the Code of Federal Regulations, Title 21, Sections 175.105, 175.300, 176.180, 177.1210. and 182.99.
This grade of HEC does not comply with USP/FCC for pharmaceutical applications.
CAS Number: 9004-62-0
CAS Name: Cellulose, 2-hydroxyethyl ether
Key Features
- Delayed hydration and superior stability
- Forms clear, smooth solutions
- Resistant to biological and chemical degradation
- Compatible with a wide range of materials
- Nonionic nature ideal for various applications
- Compliant with U.S. FDA for food-contact surfaces
Product Specifications
| Moisture Content | 5% Max |
| pH of Solution | 6 to 8.5 |
| Particle Size | Passes U.S. Mesh 325 |
| Viscosity (1% solution) | 3400 to 5500 cps |
| CAS Number | 9004-62-0 |
| CAS Name | Cellulose, 2-hydroxyethyl ether |
Perfect for cosmetic formulators, industrial manufacturers, adhesive producers, personal care developers, regulatory officers.
- 1
English