Advanced Search Results
Refine your search by using the category filter.
Cast Iron Powder, Thermal Spray
Cast iron powder used in the manufacturing of specialty alloys and as an ingredient in pyrotechnic mixtures. Also suitable for thermal spray applications, with recommendations to consider S1001 and S145C for such purposes. Engineered for industrial use with high metallic iron content and controlled granulation.
Product Specifications
| Metallic Iron | >90% |
| Total Carbon | 2.85% |
| Manganese | <1.0% |
| Silicon | <3.0% |
| Chromium | <1.0% |
| Granulation | Passing 20 mesh: 95-100%, Passing 100 mesh: 1% Max. |
Applications and Benefits:
- Manufacturing of specialty alloys
- Ingredient in pyrotechnic mixtures
- Thermal spray applications
- High iron content for industrial use
- Controlled granulation for specific needs
Caution:
Evaluate product suitability before large-scale use. For thermal spray applications, also consider S1001 and S145C. Store in a dry, cool place to maintain granulation and performance.
Iron Electrodes
These low‑carbon iron electrodes are flat sheets measuring 19 mm × 125 mm × 0.5 mm, each weighing 16 g and stamped with “FE”. Sold in packs, they are for constructing voltaic cells and conducting electrochemical, chemistry, and physics experiments.
Product Specifications
| Material | Low Carbon Iron Sheets |
| Dimensions (L × W × T) | 125 mm × 19 mm × 0.5 mm |
| Weight per Electrode | 16 g |
| Identification Code | Stamped with “FE” |
| SKU | FEFLAT |
Applications and Benefits:
- Construction of voltaic (galvanic) cells
- Electrochemical reaction studies
- Chemistry experiment setups requiring iron electrodes
- Physics experiments involving electrical conductivity and resistance
- Corrosion and material degradation testing
Key Features and Benefits
- Low carbon iron provides consistent electrical conductivity
- Precise dimensions ensure repeatable experimental results
- Stamped “FE” identification for easy tracking and inventory
- Flat sheet geometry simplifies mounting in cell assemblies
- Packaged as a set of two for convenient experiment preparation
Caution:
Metal electrodes have sharp edges; handle with protective gloves and store safely to avoid injury.
Shipping Recommendation:
We recommend the 45 lb and 90 lb packaging options to help minimize shipping costs. The 45 lb and 90 lb options avoids additional handling surcharges based on weight.
Iron Powder
IRON100 General Iron Powder is a high green strength reduced iron powder specifically manufactured for low to medium density P/M applications, resin casting, and rough magnetic paints. It is widely used for manufacturing sintered components, soft magnetic components, brazing pastes, magnetic paints, surface coating, magnetic polymers, welding, chemistry, polymer filtrations, and many other applications. IRON100 is a very fine iron powder with particles as small as 325 mesh and is a cost-effective solution for various industrial applications.
Product Specifications
| SKU | IRON100 |
| Apparent Density | 2.52 g/cm3 |
| Flow Rate | 29.00 sec/50g |
| Chemical Analysis (wt %) |
C: 0.030 O: 0.20 S: 0.006 P: 0.025 Mn: 0.008 Cr: 0.05 Ni: 0.05 Si: 0.03 Cu: 0.02 Mo: 0.003 Fe: 99.5+% |
| Typical Screen Analysis |
70 Mesh (+212 Microns): Trace 100 Mesh (-212 +150 Microns): 2.5% 140 Mesh (-150 +106 Microns): 8% 200 Mesh (-106 +75 Microns): 22% 230 Mesh (-75 +63 Microns): 17% 325 Mesh (-63 +45 Microns): 20% -325 Mesh (-45 Microns): 30.5% |
Applications and Benefits:
- Manufacturing sintered components
- Soft magnetic components
- Brazing pastes
- Magnetic paints and coatings
- Magnetic polymers
- Welding and metallurgy
- Chemistry and polymer filtrations
Additional Information:
For further details, visit the following resources:Caution:
Handle with appropriate safety measures to prevent inhalation and contact.
- 1